Description
Description
Sealite AQUAFLOAT-800 Series - Marker Buoys
The Sealite Aquafloat-800 is a rotationally-moulded marker buoy series designed as a single piece, low-cost aid to marine navigation. With a large 800mm diameter, these buoys provide clear visibility and can be fitted with a range of marine lanterns.
The Aquafloat-800 series of buoys are available in various configurations to suit IALA requirements, and are rotationally-moulded in high-visibility, UV-stabilized polyethylene.
Moulded inserts on the top section of the float allow for convenient lantern attachment, while the buoys are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage.
Moulded-in stainless steel lifting eyes in the AQF800-CAN and AQF800-CONE buoys enable ease of maintenance and servicing.
Moulded-in stainless steel lifting eyes in the AQF800-CAN and AQF800-CONE buoys enable ease of handling for maintenance and servicing.
Features of the Sealite AQUAFLOAT-800_Series
- Rotationally moulded to 8mm wall thickness
- Foam filled with closed-cell polyurethane (available without filling)
- Made from strong, durable, UV-stabilized virgin polyethylene
- Stainless steel mooring bush
- Stainless steel moulded-in lifting eye (AQF800-CAN & AQF800-CONE)
Advantages of the Sealite AQUAFLOAT-800_Series
- High visibility red, green, white or yellow as per IALA Recommendations
- Range of mooring equipment & chain available
- Available in three configurations to suit every installation
- Excellent buoyancy & stability
- Mould-in graphics to suit customer requirements
- Environmentally friendly & recyclable
Options Available for the Sealite AQUAFLOAT-800_Series
images/products/AQUAFLOAT-800_Series_stg_opt2_img.
Sealite IALA Recommended Top Marks
| Available Colours |
Red, Green, White, Yellow as per IALA Recommendations |
| Total Float Volume (L/US gal) |
See downloadable PDF |
| Reserve Buoyancy (kg/lb) |
See downloadable PDF |
| Maximum Mooring Load (kg/lb) |
See downloadable PDF |
| Maximum Draft (mm/inches) |
See downloadable PDF |
| Minimum Freeboard (mm/inches) |
See downloadable PDF |
| Material |
Rotationally-moulded UV-stabilized virgin polyethylene |
| Wall Thickness (mm/inch) |
8 / 1/3 |
| Filling |
Closed-cell polyurethane foam |
| Ballast (kg/lb) |
20 / 44 |
| Height (mm/inch) |
From 860 / 33 7/8 |
| Width (mm/inch) |
800 / 31 1/2 |
| Mass (kg/lb) |
See downloadable PDF |
| Life Expectancy |
Up to 12 years |
| Quality Assurance |
ISO9001:2008 |
| Trademarks |
SEALITE® is a registered trademark of Sealite Pty Ltd |
| Warranty |
1 year |